Yearly Archives - 2018

Glass Cord is supplied in a wide range of treatments for compatibility with CR, EPDM, NBR Timing Belt.

How often should I replace my timing belt?

Always refer to your maintenance book when determining when to replace your timing belt. The general range is every 60,000 -100,000 miles. However, it’s better to replace your timing belt before it snaps because then it will damage your engine and require you to spend even more money.

If you are in the business of automotive timing belt for many years. You will see Kaibintech timing belt is really excellent if only you enlarge this picture.

What does the timing belt do?

The timing belt has the main responsibility to synchronize the camshaft and crankshaft to allow the fuel to ignite in the combustion chamber. In order for this process to take place, valves and pistons need to be in the correct position. Without a timing belt, the car will not be able to start.

How to use the factfinder to measure v-belt?

1, Hold the Factfinder gauge so that blue split pulley with grove for v-belt is facing you. 2, Place the belt to be measured into the fixed pulley groove at the top of the gauge, then into the moveable pulley. 3, Pull down on the movable pulley until the belt is taut. Pull the belt as right as possible for a good reading. 4, Look at the outer edge of the belt as it appears in the measurement sots of the moveable [...]

When should you replace your timing belt?

Vehicle manufacturers recommend “timing belt” replacement typically every six years or 60,000 to 100,000 miles. Failing to replace your “timing belt” can result in complete breakdown or serious engine failure. Generally, “timing belt problems” give no warning. There is no squeak, rattle or noise that will let you know it’s time. Timing on your engine must be exact or the valves and pistons may collide, resulting in very expensive engine repairs. Don’t let this happen to you! Talk with [...]

What is an air spring for?

Air spring is load-carrying component of an air suspension system used on machines,trucks, buses, trailers, and vans. A system used on buses consists of an air compressor, an air-supply tank, leveling valves, check valves, bellows, and connecting piping.

sample is free of charge

From now on, our rubber bladder(rubber sleeve) for air spring sample is free of charge! You need to pay its shipping cost only. For details, Please contact us.

Why we have minimum order quantity?

Why we have minimum order quantity? As to the raw edged v belt including REC, REL, REP and timing belt, we need to cut each piece from a roll(sleeve) as below. We have to produce at least one roll(sleeve) at one time. A roll/sleeve has following quantity. That is why we have MOQ. If we have ready in stock, we can supply it. Then no need to produce a roll(sleeve).

Kaibintech-Dust-Cover-for-Air-Springs

  We Supply Dust Cover, Air Springs Repair Kits, Wholesale Various High Quality Dust Cover Air Springs, Repair Kits Products from Global Dust Cover Factory, Air Springs Repair Kits Suppliers and Dust Cover Air Springs Repair Kits Factory.

Online Service
Live Chat