V-ribbed belt

  • multi-ribbed serpentine belt

    It is usually applicable to alternator, air conditioning compressor, power steering pump, and, sometimes, the water pump and so on.

  • PL-section-multi-rib-v-belts

    PL Section V-Belts
    Pitch: 4,70 mm/0,09″
    Heigth: 9 mm /0,35″
    Angle: 40 degree
    Production range: Maximum 100 ribs / between 650 mm to 15000 mm

  • PM-section-multi-rib-v-belts

    PM Section V-Belts
    Pitch: 9,40 mm/0,37″
    Heigth: 14,35 mm /0,57″
    Angle: 40 degree
    Production range: Maximum 50 ribs / between 1200 mm to 16000 mm

  • J Section Multi-Rib V-Belts

    J Section Multi-Rib V-Belt is a power transmission V-belt for drives with a small diameter sheave. It is made of CR(Chloroprene rubber) or EPDM (ethylene propylene diene monomer) rubber for resistance to weathering, oils, water, and some solvents. It has a truncated profile for increased flexibility and reduced heat buildup on high-speed drives with small diameter sheaves. It has fiber-reinforced ribs for resistance to wear and is smooth running for minimal vibration at high speeds. This V-belt is with oil and heat resistance standards and static conductivity requirements and is suitable for use with applications such as appliances, outdoor power equipment, roller conveyors, machine tools, medical equipment, and exercise equipment.

  • V-ribbed belt

    Kaibintech ribbed belt’s construction

    Top Fabric
    Flexible, bias cut fabric is impregnated with oil and heat resistant rubber to eliminate wear and cracking.

    Insulation Rubber
    Cords are encloses in an oil and heat resistant rubber compound with strong adhesive qualities for maximum cord support and long life.

    Tensile Cords
    High tensile strength aramid or pre-stretched polyester cords insure high horsepower capacity and constant belt tension on spring tension systems and locked center drives.

    Rib Rubber
    Rib rubber is reinforced with fiber chips and heat resistant rubber compound for wear resistance and reduced noise. Kaibintech ribbed belt is mainly made of CR or EPDM.

  • Teeth wedge belt

    Roller Mill Belts are available either Synchronous (8M, STD8 or 14M) on one side and Poly-V (PV-K or PV-L)on the other, double-sided synchronous or double-sided ribbed (PV-L). The ribbed profile allows functional slippage under jamming conditions and absorbs resulting torque spikes. It is a drive belt for flour milling machine, Dishwasher, Sterilizer, Motorcycle, Packaging Machinery, Mining Equipment, Sander, Dryer, Annealing Furnace, inkjet printing machine, Food Machinery, Conveyor, Bonding Machine, etc.

  • Double side ribbed belt

Online Service
Live Chat